Home > Fixings

Placing air terminal devices in the right place is critical, so we offer a variety of fixings for precise installation of ventilation grilles and diffusers. This gives architects the flexibility to create building designs that are aesthetically bold and functionally strong.

Waterloo provides full consultancy to help architects choose the right fixings to suit the project, making sure that ventilation grilles and diffusers deliver effective air flow but also complement the overall vision for the project.

Visit our design page to find out more about how our well-engineered air terminal devices can support architectural design.

Diffusers

For diffusers there are a wide variety of options that can be used for fixings. Most fixing scenarios would include a concealed bracket that would then fix behind the main body of the diffuser itself, directly into either one of our Plenum Chambers, on site Ducting, and/or via the ceiling or wall materials (such as Plasterboard etc).

We can provide you with more exact information upon request.

Grilles

SF Grilles fixing option

Screw fixed through face, visible screw fixing and a fixed subframe to aid the retention of the grille. Ideal for wall, bulkhead or ceiling mounting.

CF Grilles fixing method

Clip fixing, with hidden screw fixing behind and a fixed subframe to aid the retention of the grille. Ideal for wall mounting only.

AFCF Grilles fixing option

Angular frame with clip fixing, hidden screw fixing behind and a fixed subframe to aid the retention of the grille. Ideal for wall mounting only.

RCCF Grilles fixing method

Round corner with clip fix. Hidden screw fixing behind and a fixed subframe to aid the retention of the grille. Ideal for wall mounting only.

RCHS Grilles fixing method

Round corner with hidden screw fixing behind and a fixed subframe to aid the retention of the grille. Ideal for wall, bulkhead or ceiling mounting.

AFHS Grilles fixing option

Angled frame with hidden screw fixing behind and a fixed subframe to aid the retention of the grille. Ideal for wall, bulkhead or ceiling mounting.

CRB Grilles fixing method

Concealed rear bracket fixing, with hidden rear screws behind and a fixed subframe to aid the retention of the grille. Ideal for wall, bulkhead or ceiling mounting.

BSSBD Plasterboard fixing

Back strap and saddle bracket with duct bolt fixing and a fixed subframe to aid the retention of the grille. Ideal for wall, bulkhead or ceiling mounting.

AFVS Ceiling fixing option

Angular Frame V spring with hidden screw fixing and a fixed subframe to aid the retention of the grille. Ideal for wall, bulkhead or ceiling mounting.

PFVS Ceiling fixing method

Plaster frame V spring with hidden screw fixing and a fixed subframe to aid the retention of the grille. Ideal for wall, bulkhead or ceiling mounting.

VS Ceiling fixing option

V spring ceiling mount with hidden screw fixing and a fixed subframe to aid the retention of the grille. Ideal for wall, bulkhead or ceiling mounting.

Plaster

PL fixing option

Plaster Line frames are screw fixed and have a keyed surface to allow a plaster skim to be applied for a frame less finish.

Plenum

BSSBP Plenum fixing

Back strap and saddle bracket with plenum screw fixing and a fixed subframe to aid the retention of the grille. Ideal for wall, bulkhead or ceiling mounting.

For advice and guidance on how fixings might effect your product selection, please  contact us

Your email address will not be published. Required fields are marked *

*

Open